Professional CAN-BUS Diagnostic Scan Tool With OP-COM Interface
Latest Firmware Version V1.39 !
Support 2009 Models !
Support Saab 9-5 and Saab 9-3 CAN !
Covers almost all Opel cars from 1992 - 2008, even new cars with
CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B !
OP-COM is a PC based Opel diagnostic program. This interface can
read out and clear fault codes, shows you live data, lets you to
perform output test, and supports remote, and key programming.
The program supports many control units, such as
Engine Cooling module
Electronic Climate Control
Body Control Unit
Since Opel uses many pin in the On-Board Diagnostic connector, the
diagnostic interface works as a multiplexer, and selects the
appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82,
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
You can print out, save, or copy the fault codes to any other
From the fault codes window, you can go directly to the measuring
The program shows you measuring block information on many control
module, you can choose anything from the list on your own. The
program is capable of showing 8 measuring block parameter
simultaneously. The sample rate is depends mostly on the
communication protocol. For example, older system, like Omega-B X
25 DT Engine (ISO-9141-2) can be very slow, during communication,
while newer Multec, or Bosch units are faster (using KWP-2000), and
the newest CAN based control units are very fast!
You will get a feedback on the state of the activated output. This
will helps you to find the failed components more easily.
With OP-COM, you can learn keys to immobiliser, and remote keys to
the central door locking, or alarm.
You can also reset, and program the following immobiliser related
items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the
You can also reset, and program the Service interval reminder on
Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
You can code SAB6, and SAB8 airbags with the software.
The diagnostic inteface is USB port based, so there will be NO
COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle
the awesome speed of the High-Speed CAN-BUS systems, which is
currently 500kbps. This is the main reason, why only the USB port
based interface is available for CAN-BUS.
# NOTE: The program can only be used with a special interface
hardware. A simple serial or USB port based standard interfaces (K,
KKL, etc) cannot be used !
Opel scanner, Diagnostic Scanner, Opel interface, Opel scan cable,
Opel diagnostic tool, OPEL COM Interface, OP-COM